
On this page (9)
When an IPTV channel has a picture but no sound, the usual causes are an audio format your TV or soundbar cannot decode, a passthrough setting that sends the wrong signal, a muted device somewhere in the chain or the wrong audio track selected in the player.
No sound is frustrating because everything else seems to work. The fix depends on whether the problem affects one channel, some channels or everything. This guide takes you from the simplest checks to the settings that solve the stubborn cases.
Step 1: The Obvious Checks
- Check that the TV, soundbar and streaming device are not muted, and that volume is up on each.
- Check that the soundbar is on the right input (HDMI ARC, optical or Bluetooth).
- Play something in another app, such as YouTube. If that has sound, the problem is in the IPTV app or the channel.
Step 2: One Channel or Many?
| Situation | Likely cause | Next step |
| Only one channel silent | The source, or an unusual audio format | Try another feed of the channel |
| Several channels silent (often HD or 4K) | Dolby or AC-3 audio not decoded | Change passthrough settings |
| Everything silent in IPTV only | App audio settings | Reset player audio options |
| Everything silent everywhere | Device or TV audio output | Check device sound settings |
Step 3: Fix Passthrough and Audio Format
Many HD and 4K channels use Dolby Digital (AC-3) or Dolby Digital Plus (E-AC-3) audio. If your player passes this directly to a TV or soundbar that cannot decode it, you hear nothing.
- In the IPTV player’s settings, turn off audio passthrough, so the device converts the sound to PCM, which every TV understands.
- On Fire TV, go to Display & Sounds > Audio and set Surround Sound to “Stereo” as a test.
- On Google TV, set the audio format to “Auto” or choose formats manually that your sound system supports.
If sound returns, your setup did not support the format. You can later re-enable passthrough only for the formats your soundbar handles.
Step 4: Check the Audio Track
Some channels and films carry several audio tracks, such as different languages or an audio description track. During playback, open the player’s audio menu and try each track. A silent or unusual track may have been selected by default.
Step 5: Reset the App
- Clear the IPTV app’s cache in the device’s app settings.
- If the problem continues, update or reinstall the app.
- Re-add your playlist if needed.
Optical Cables and Older Soundbars
Optical connections carry stereo and standard Dolby Digital, but not Dolby Digital Plus. If your soundbar is connected by optical cable, set the TV’s digital audio output to PCM or Dolby Digital rather than Auto.
Bluetooth Speakers and Headphones
If you use Bluetooth audio, make sure the device is connected and not paired to a phone instead. Some Bluetooth devices disconnect when idle; reconnect them from the device’s Bluetooth settings.
Frequently Asked Questions
Why is there sound on SD channels but not HD?
HD feeds often use Dolby audio. Turn off passthrough so the device converts it.
Why does sound cut out for a few seconds?
Often a weak connection or HDMI handshake. Check the network and try another HDMI cable.
Can I fix it on one channel only?
Try a different feed of that channel, or report it to support.
Sound Restored
Start with the basics, then focus on passthrough and audio tracks; that solves most silent channels. If the sound plays but out of time with the picture, read audio out of sync, or see the Dodo IPTV plans.

